At a glance
- Typical cost
- About $1,060 per square asphalt; $1,730 metal
- How often
- Once every 15 to 30 years for asphalt shingles, per NRCA
- DIY or hire
- Hire a pro
Per-square figures are the 2025 Cost vs. Value Report national job costs divided by the 30 squares in each project.
A full tear-off and replacement with asphalt shingles runs about $1,062 per roofing square, and standing-seam metal about $1,729 per square. Those figures are the national average job costs in the 2025 Cost vs. Value Report from Zonda and the Journal of Light Construction, $31,871 for asphalt and $51,865 for metal, divided by the 30 squares in each project description. A square is 100 square feet of roof surface.
Installed-cost data from acceptable sources is thin. One published source ties a price to a stated roof size, so the table below carries a limited-data flag. No source read for this article prices 3-tab and architectural shingles separately as installed jobs, and none gives an installed cost per square for wood, tile or slate.
| Item | Low | Typical | High |
|---|---|---|---|
| Asphalt shingles, tear-off and replace $31,871 national average job cost divided by 30 squares. Cost vs. Value 2025. One source, so no range. | $1,062 | $1,062 | $1,062 |
| Standing-seam metal, tear-off and replace $51,865 national average job cost divided by 3,000 sq ft (30 squares). Cost vs. Value 2025. One source, so no range. | $1,729 | $1,729 | $1,729 |
| 3-tab asphalt shingles, material only GAF Royal Sovereign at $43.97 per bundle, $39.57 at 48 or more bundles. Home Depot, Nov 16, 2026. | $119 | $132 | $132 |
| Architectural asphalt shingles, material only GAF Timberline HDZ at $47.97 per bundle, $43.17 at 39 or more bundles. Home Depot, Nov 16, 2026. | $130 | $144 | $144 |
What a roofing square is and how the math works
Roofers measure, order and quote in squares. The Asphalt Roofing Manufacturers Association's Residential Asphalt Roofing Manual (2014) puts it in one line: 1 square equals 100 square feet. A 3,000 square foot roof surface is 30 squares.
Shingles are sold by the bundle. The GAF bundles listed at Home Depot (2026) each cover 33.33 square feet, so three bundles make one square. The ARMA manual (2014) adds that most jobs need 2% to 10% extra shingles for trim waste, depending on how many valleys, dormers, hips and penetrations the roof has.
| Line | Published figure | Per square | Source |
|---|---|---|---|
| Asphalt shingles, tear-off and replace, 30 squares | $31,871 | $1,062 | Cost vs. Value 2025 |
| Standing-seam metal, tear-off and replace, 3,000 sq ft | $51,865 | $1,729 | Cost vs. Value 2025 |
| 3-tab shingles only (GAF Royal Sovereign) | $43.97 per bundle | $131.91 | Home Depot, Nov 16, 2026 |
| Architectural shingles only (GAF Timberline Natural Shadow) | $45.97 per bundle | $137.91 | Home Depot, Nov 16, 2026 |
| Architectural shingles only (GAF Timberline HDZ) | $47.97 per bundle | $143.91 | Home Depot, Nov 16, 2026 |
The shingle prices are from one store's online listing and can differ by location. Two things stand out. The shelf gap between 3-tab and architectural shingles is $12 per square. And the shingles are a small part of the bill: $143.91 is about 14% of the $1,062 installed figure. The rest covers everything else in the project description, labor included.
Why three sources give three different totals
The whole-job numbers do not agree, and they are not measuring the same thing.
- Cost vs. Value (2025): $31,871 for asphalt. This is a modeled price for one defined job. The methodology page says local costs come from Verisk's XactRemodel estimating software and the national baseline is indexed with Bureau of Labor Statistics price and wage data. The page does not say whether contractor overhead and profit are included.
- ServiceTitan (2026): $24,354 median. The software company reports the median completed residential reroof on its platform rose from $18,050 in May 2025 to $24,354 in April 2026. It gives no roof size or material, and it states the data is not nationally representative.
- Census Bureau and HUD (2024): $10,000 median. The 2023 American Housing Survey infographic lists a $10,000 median homeowner expenditure on roofing projects for 2021 to 2023, across 8.3 million projects. It does not state roof size, material or whether a job covered the whole roof.
Only the first can be turned into a per-square price, because only it states the size. Treat $1,062 and $1,729 as the price of that specific 30-square job, and expect a real quote to differ.
What moves a per-square price
The Cost vs. Value asphalt project (2025) is a useful checklist, because every item in it is in the price: removal and disposal down to bare wood sheathing, 30 squares of fiberglass asphalt shingles of at least 235 pounds with at least a 25-year warranty, new 30-pound felt or a synthetic equivalent, galvanized drip edge, aluminum flashing, custom flashing at two skylights, and a cap at a vented ridge, all on a rectangular hip roof. A quote that differs on any of these is pricing a different job.
- Tear-off or recover. The ARMA manual (2014) says that, depending on local codes, a maximum of two roofs, the original and one reroof, may be installed before a tear-off becomes mandatory. A 2018 IRC re-roof guide published for the City of East Point, Georgia (2020) quotes section R908.3.1.1: no recover where the existing roof is water-soaked or deteriorated, is slate, clay, cement or asbestos-cement tile, or already has two or more applications of roofing.
- Decking. The same guide says that on a complete tear-off, boards or sheathing that are warped, cracked or delaminated must be repaired or replaced. The quantity is not known until the old roof is off, so ask how replacement decking will be priced. No sourced per-sheet figure was found.
- Pitch. The ARMA manual (2014) says standard application methods cover slopes from 4:12 to 21:12. Slopes from 2:12 to less than 4:12 need special low-slope procedures, and slopes steeper than 21:12 need special steep-slope procedures. None of the sources puts a dollar figure on pitch.
- Complexity. Valleys, dormers, hips and penetrations raise trim waste toward the 10% end of ARMA's range. The Cost vs. Value job assumes a simple rectangular hip roof.
- Underlayment and ice barrier. The metal project in Cost vs. Value (2025) specifies ice-barrier membrane at the perimeter and premium synthetic underlayment. The asphalt project specifies 30-pound felt or a synthetic equivalent.
- Material weight. The East Point guide (2020) requires an engineered analysis of the roof structure when the roofing material exceeds 7.5 pounds per square foot. That is a step to price before choosing tile or slate.
- Region. Cost vs. Value (2025) covers 119 US markets and uses local cost data. The regional figures sit behind a selector on the report page and were not read for this article, so no regional spread is given here.
How long each material lasts
Service life sets how often this bill comes around. A USDA Forest Service facilities table (undated, read in 2026) credits these ranges to the National Roofing Contractors Association.
| Roofing material | Typical life in years | Condition noted in the table |
|---|---|---|
| Asphalt composition shingle | 15 to 30 | None given |
| Wood shingles and shakes | 15 to 30 | None given |
| Sheet metal | 20 to 50 or more | Depends on gauge and quality of fastening and application |
| Tile | 50 | Depends on quality of tile and climate |
| Slate | 50 to 100 | Depends on grade |
Source: USDA Forest Service, Roofing: Typical Life Expectancy, citing NRCA.
A warranty is not a service life. Home Depot's listing for GAF Timberline HDZ (2026) advertises a lifetime limited warranty and a 25-year algae protection warranty, while the NRCA range for asphalt shingles tops out at 30 years. ARMA's FAQ (undated, read in 2026) says a residential roof more than 20 years old is a prime candidate for reroofing.
What a roof quote should put in writing
A quote that gives only a total cannot be compared with another one. Ask for these lines, drawn from the scope items above and from the Federal Trade Commission (2022).
- The roof area in squares and the waste allowance.
- Tear-off or recover, the number of existing layers, and disposal.
- A unit price for replacing damaged decking.
- Shingle or panel brand, product line and warranty.
- Underlayment type, and ice barrier where the local code calls for it.
- Drip edge, flashing at walls, chimneys and skylights, and ridge ventilation.
- Who pulls the permit and schedules the inspection.
- The contractor's name, address, phone and license number, and an estimated start and completion date, which the FTC (2022) says belong in the written contract.
The FTC (2022) also advises getting multiple written estimates, asking for an explanation when they differ widely, not paying the full amount up front, and holding the final payment until the work is done.
Permits, licensing and who goes on the roof
Permit and licensing rules are local. The East Point guide (2020) requires a building permit for a residential re-roof and a final roof inspection, and allows no more than two layers of roofing on completion. Other jurisdictions differ, so call the building department before signing. The FTC (2022) lists a contractor asking the homeowner to get the permits as a warning sign.
Roofing is its own license class in some states. California's Contractors State License Board (2026) has a C-39 Roofing Contractor classification, and section 489.105 of the Florida Statutes (2026) defines a roofing contractor as a distinct contractor category. The FTC (2022) says to consider only contractors who are licensed and insured, to check the license with the state or county, and to ask for proof of insurance.
Work on a roof surface is for insured roofing contractors. OSHA rule 1926.501(b)(13) requires guardrails, safety nets or personal fall arrest systems for residential construction workers 6 feet or more above a lower level. The ARMA manual (2014) says roof measurements should be taken by a roofing professional and does not recommend that homeowners climb onto a roof.
Sources
- Journal of Light Construction and Zonda, 2025 Cost vs. Value Report, national averages. Accessed November 16, 2026.
- Journal of Light Construction, Cost vs. Value project description: Roofing Replacement, Asphalt Shingles. Accessed November 16, 2026.
- Journal of Light Construction, Cost vs. Value project description: Roofing Replacement, Metal. Accessed November 16, 2026.
- Journal of Light Construction, 2025 Cost vs. Value Report methodology. Accessed November 16, 2026.
- US Census Bureau and HUD, Home Improvements infographic, 2023 American Housing Survey. Accessed November 16, 2026.
- ServiceTitan, Cost of a Residential Roof Replacement. Accessed November 16, 2026.
- Asphalt Roofing Manufacturers Association, Frequently Asked Questions for Professionals. Accessed November 16, 2026.
- Asphalt Roofing Manufacturers Association, Residential Asphalt Roofing Manual, 2014 edition. Accessed November 16, 2026.
- USDA Forest Service, Roofing: Typical Life Expectancy (table credited to the National Roofing Contractors Association). Accessed November 16, 2026.
- City of East Point, Georgia, and SAFEbuilt, 2018 IRC Building Guide: Residential Re-Roof. Accessed November 16, 2026.
- OSHA, 29 CFR 1926.501, Duty to have fall protection. Accessed November 16, 2026.
- Federal Trade Commission, How To Avoid a Home Improvement Scam. Accessed November 16, 2026.
- California Contractors State License Board, C-39 Roofing Contractor classification. Accessed November 16, 2026.
- Florida Legislature, The 2026 Florida Statutes, section 489.105 definitions. Accessed November 16, 2026.
- Home Depot, GAF Timberline HDZ shingles product page and price. Accessed November 16, 2026.
- Home Depot, GAF Royal Sovereign and Timberline shingle listings and prices. Accessed November 16, 2026.