housecarecosts

Part of the house

Heating and cooling

Furnaces, heat pumps, air conditioners and the filters that keep them running.

Heating and cooling equipment is usually the most expensive machinery in a house, and it tends to fail on the coldest or hottest day of the year, when there is the least time to think. This section is meant to be read before that day. It covers what a replacement should cost by equipment type and size, how to decide between repairing an older unit and replacing it, and what the routine upkeep is between those two events.

Every guide here opens with the same three facts: a typical cost range, how often the job comes up, and whether it is realistic to do yourself. The cost ranges are built from published sources and are dated, because equipment prices and efficiency rules both move. Where federal efficiency standards or refrigerant rules change what can be installed, the article says so and links to the rule itself.

Some heating and cooling work is reasonable for a homeowner. Changing a filter, clearing leaves from around an outdoor unit, and checking that a thermostat has fresh batteries all fall in that group. Other work is not. Anything that involves a gas line, a flue, refrigerant, or the high-voltage side of the equipment belongs to a licensed technician, and the guides on this site say where that line sits instead of describing how to cross it.

A note on independence. The editor of this site owns a heat pump installation business in Maine. This site does not recommend that business, link to it, or collect leads for it, and comparisons between heat pumps and fuel-burning equipment here rest on cited sources such as the US Department of Energy, not on what any one installer sells.

If you are new to owning a home, start with the filter schedule. It is the cheapest job in this section and the one most often skipped. If a contractor has just handed you a large quote, start with the replacement cost guide and the repair-or-replace decision guide, then compare the quote against the ranges and the questions listed there.

Guides in this section

Cost tables